Campanas extractoras

Piana Sottopensile

Piana Sottopensile
Campanas extractoras
Piana Sottopensile

The Flat below wall cabinet Hood was designed to be positioned underneath your kitchen wall units, protecting them from the heat of the wood-burning range cooker or cooker stove. The extensive range of customisation possibilities in terms of styling and dimensions allows all possible needs to be accommodated, from country settings to modern ambiances.
 

Es la campana perfecta cuando se quiere aprovechar al máximo el espacio entre los muebles altos de la cocina. Esta campana se instala debajo de los muebles de pared, por lo que el tubo de ventilación queda oculto.
 
Piana Sottopensile
Partners

Características técnicas

    • Installation: undermount
    • Cladding: Stainless steel/Painted
    • Ducted or air recirculation version
    • Controls: touch or mechanical control panel
    • Timer function
    • Lighting: with LED bars
    • Dishwasher-safe filters
    • Resistant to high temperatures
    • Remote control (optional)
    • Extraction rate: 440/875 m3/h
    • Noise level: 60/65 dB
    • Power consumption: from 149.8 to 308.2 W
    • Speed settings: 4
    • Outlet: ø 120/150 mm
     
      

Datos técnicos

CPS6

CPS6
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 400 to 600 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 4,8 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS8

CPS8
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 601 to 800 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 6,7 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS9

CPS9
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 801 to 900 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 6,7 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS12

CPS12
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 901 to 1200 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 9,6 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS14

CPS14
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 1201 to 1400 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 9,6 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS15

CPS15
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 1401 to 1500 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 9,6 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS18

CPS18
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 1501 to 1800 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 13,4 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

CPS21

CPS21
C1/L1 = Version with 445 m3/h motor installed in the body of the hood

C2/L2 = Version with 910 m3/h motor installed outside the body of the hood

 
A from 1801 to 2100 mm
B 500 mm
C1 from 130 to 300 mm
C2 from 70(1) to 300 mm
L1 from 75 to 400 mm
L2 85 mm
X (2)
Ø outlet 120/150 mm
Max suction power (W)  137/290 W
LED Power ( (W) 18,2 W


(1) 100 mm with Epoka, Variant border.
(2) Vent position upon request.

The dimensions in the table are purely indicative. Every hood is built to the dimensions and specifications provided by the customer (subject to feasibility check).

Documentación

Descargar los archivos PDF de la serie


ˆ